Shaashada Stn LCD 20 pin negative 240128a dhibic matrix screen graphic lcd module
Hordhac Product
| Nambarka Model | RXMG-240128A |
| Cabbirka Muujinta | 5.7 inch ama customzied |
| Nooca | STN |
| Hadda shaqaynaysa | 18mA (5.0V) |
| Ku shaqaynta Voltage | 4.8 ~ 5.2V |
| Xakamaynta | T6963C |
| Iftiin danbe | Cadaan (jaalle cagaaran ikhtiyaari ah) |
| Qaabka muuqaalka | Stn taban buluug (jaale cagaaran ikhtiyaari ah) |
| Cabbirka dhibicda | 0.45X0.45(WXH) mm |
| Heerkulka shaqada | -20 ~ 60 ℃ |
| heerkulka kaydinta | -30 ~ 70 ℃ |
| Codsiga | Bandhiga qalabka, qalabka iyo wixii la mid ah |
Qaabeynta pin:
| Pin NO. | Magaca Pin | Sharaxaada Pin |
| 1 | FG | Dhulka qaab-dhismeedka |
| 2 | VSS | Koronto taban |
| 3 | VDD | Koronto wanaagsan |
| 4 | V0 | LCd galitaanka danab wadista |
| 5 | WR | Qor calaamad |
| 6 | RD | Akhri signalka |
| 7 | CE | Chip karti |
| 8 | C/D | Xulashada diiwaanka taliska/xogta |
| 9 | NC | Null |
| 10 | /RST | Dib u dajin signal |
| 11-18 | D0-D7 | Baska xogta |
| 19 | FS | Dhibcaha Calaamadaha (L) |
| 20 | VEE | Korontada wadista Lcd |
| 21 | BLA | Iftiin dambe oo koronto togan |
| 22 | BLK | Iftiinka dambe koronto taban |
Adeegyadayada
KABADEED:
| Bandhig | qayb, garaaf, cutubka monochrome LCD module&TFT waa la aqbalay |
| Qaabka muuqaalka | TN, STN, FSTN,HTN, beddela, milicsi, gudbiye, cagaar jaale, buluug, cawl optional |
| Nooca muujinta | COB,COG, TAB |
| miisaanka Lcd (cm) | 0.11,0.14 |
| dhumucda iftiinka dambe (cm) | 2.8,3.0,3.3 |
| Interface | Barbarro (8bit, 4bit, 16 bit, 80 mode, 68mode), taxane (i2c, spi, uart, usb) |
| Xakamaynta | Ikhtiyaari |
| IC | Dhimasho ama baakad ikhtiyaari ah |
| Hardware ama software | Dhammaan waa la aqbalay |
| Xog la siiyay | Dhammaan fikradaha, muunad, sawir, sawir-qaadis, buug-gacmeedka iyo wixii la mid ah waa OK |
1, waxaan rabaaModule-ka LCD wuxuu soo bandhigay 8 nambar, cabbirkuna waa 35mm*70mm………?
Jawaab: Dhib malahan. Marka hore, pls noo soo dir warqaddaada sawir-qaadista ama muunadaha; waxaanu soo bandhigi doonaa midka ku haboon haddii ay tahay alaabooyinka caadiga ah. Ama waxaan wax ka beddeli karnaa iyada oo ku saleysan mid ka mid ah.
2,Module LCD-kan waa waxa aan rabno, laakiin waa cabbir weyn, ma haysaa wax ka yar?Aiyo waxa ku jira waxa ay u baahan yihiin in wax yar la beddelo.
Jawaab: Qaybta nooca LCD moduleka, haddii aad u baahan tahay wax ka beddel cabbirka dulucda ama waxa ku jira, muraayad LCD cusub ah ayaa loo baahan yahay. Waxaan kuu sheegi doonaa caaryada
lacag ka dib markii la xaqiijiyo marka lacag bixinta,Waxaan u bilaabi doonaa warqadda sawirka si aad u hubiso.
3, Tani module LCD nalka gadaal waa huruud-cagaaran,laakiin Iwaxay rabaan nalka dambe ee buluugga ah.
Jawaab: dhib malahan, waan kuu bedeli karnaa.
4, Waxaan doonayaa in aan astaysto module LCD cusub.Cma samaynaysaa?
Jawaab: Haa, waan awoodnaa. Fadlan soo dir warqaddaada sawir-qaadista. Haddii aadan haysan, fadlan ii sheeg cabbirka dulucda muraayadda LCD, macluumaadka muujinta, haddii aad u baahan tahay nalka dambe ama PCB
guddiga IC, Waxaan qiimeyn doonaa kharashkaoo aan ku siin qiimo dhaqso ah.
5, Waa maxay wakhtiga hogaaminaya qalabaynta
Jawaab: 15 ilaa 30 maalmood ka dib markaad sawirto caddaynta warqadda iyo bixinta kharashka qalabka, waxaanu kuu sheegi karnaa wakhtiga saxda ah ee aad xaqiijinayso warqad sawir leh.
6,Ma noo soo diri kartaa muunado hubin?
Jawaab: Haa,. Dalabka muunado ayaa diyaar ah
7,waa maxayWaqtiga hogaaminta?
Jawaab: Haddii aan haysanno kayd kuwa caadiga ah, wakhtiga hogaaminta waa hal maalin kadib lacag bixinta. Haddii ay tahay wax soo saarka tirada badan ee kuwa gaarka ah, wakhtiga hogaaminta waa qiyaastii 1530 maalmood.
Haddii aan hore u dhammayn karno, waanu diri doonaaakhbaartaada ka hor
8, Waa maxay hababka lacag bixinta ee aad aqbali kartaa?
Jawaab: Waxaan hadda aqbalnaa kaliya T/T.