16 × 2 xaraf LCD bandhigay module, 1602 dhibic matrix alphanumeric LCD screen
Hordhac Product
| Nambarka Model | RXMC-1602A |
| Cabbirka Muujinta | 64.5x13.8mm (VA.) |
| Nooca | Dabeecad |
| MUUQAAL NOLOSHA | 16 CharacterX2 xariiq |
| KU SHAQEYNTA Voltage | 4.8 ~ 5.2V |
| Ka shaqee hadda | 2.0mA (5.0V) |
| Hadda LED-ka | <100mA |
| Cabbirka jilaha | 2.95X4.35(WXH) mm |
| Xakamaynta IC | HD44780U |
| Eeg jihada | 6H |
| Interface | Barbar socda |
| Midabka LCD | BLUE NEGATIVE |
| Iftiin danbe | CADAAN |
| Codsiga | Character, bandhigay digit for printer, qalab iyo wixii la mid ah |
Qoondaynta Pin:
| Pin NO. | Magaca Pin | Sharaxaada Pin |
| 1 | VSS | Korontada xun, gound |
| 2 | VDD | Koronto wanaagsan |
| 3 | V0 | LCd galitaanka danab wadista |
| 4 | RS | Diiwaangeli doorashada |
| 5 | R/W | Akhri/qor signalka |
| 6 | E | Chinp karti |
| 7-14 | D0-D7 | Baska xogta |
| 15 | BLA | Korontada iftiinka dambe ee togan |
| 16 | BLK | Korontada iftiinka dambe ee xun |
Adeegyadayada
KABADEED:
| Bandhig | qayb, garaaf, cutubka monochrome LCD module&TFT waa la aqbalay |
| Qaabka muuqaalka | TN, STN, FSTN,HTN, beddela, milicsi, gudbiye, cagaar jaale, buluug, cawl optional |
| Nooca muujinta | COB,COG, TAB |
| miisaanka Lcd (cm) | 0.11,0.14 |
| dhumucda iftiinka dambe (cm) | 2.8,3.0,3.3 |
| Interface | Barbarro (8bit, 4bit, 16 bit, 80 mode, 68mode), taxane (i2c, spi, uart, usb) |
| Xakamaynta | Ikhtiyaari |
| IC | Dhimasho ama baakad ikhtiyaari ah |
| Hardware ama software | Dhammaan waa la aqbalay |
| Xog la siiyay | Dhammaan fikradaha, muunad, sawir, sawir-qaadis, buug-gacmeedka iyo wixii la mid ah waa OK |
1, waxaan rabaaModule-ka LCD wuxuu soo bandhigay 8 nambar, cabbirkuna waa 35mm*70mm………?
Jawaab: Dhib malahan. Marka hore, pls noo soo dir warqaddaada sawir-qaadista ama muunadaha; waxaanu soo bandhigi doonaa midka ku haboon haddii ay tahay alaabooyinka caadiga ah. Ama waxaan wax ka beddeli karnaa iyada oo ku saleysan mid ka mid ah.
2,Module LCD-kan waa waxa aan rabno, laakiin waa cabbir weyn, ma haysaa wax ka yar?Aiyo waxa ku jira waxa ay u baahan yihiin in wax yar la beddelo.
Jawaab: Qaybta nooca LCD moduleka, haddii aad u baahan tahay wax ka beddel cabbirka dulucda ama waxa ku jira, muraayad LCD cusub ah ayaa loo baahan yahay. Waxaan ku ogeysiin doonaa lacagta caaryada kadib xaqiijinta marka lacag bixinta
Waxaan u bilaabi doonaa warqadda sawirka si aad u hubiso.
3, Tani module LCD nalka gadaal waa huruud-cagaaran,laakiin Iwaxay rabaan nalka dambe ee buluugga ah.
Jawaab: dhib malahan, waan kuu bedeli karnaa.
4, Waxaan doonayaa in aan astaysto module LCD cusub.Cma samaynaysaa?
Jawaab: Haa, waan awoodnaa. Fadlan soo dir warqaddaada sawir-qaadista. Haddii aadan haysan, fadlan ii sheeg cabbirka dulucda bandhigga LCD, macluumaadka muujinta, haddii loo baahdo nalka dambe ama guddiga PCB ee leh IC, Waxaan qiimeyn doonnaa qiimaha
oo aan ku siin qiimo dhaqso ah.
5, Waa maxay wakhtiga hogaaminaya qalabaynta
Jawaab: 15 ilaa 30 maalmood ka dib markaad sawirto caddaynta warqadda iyo bixinta kharashka qalabka, waxaanu kuu sheegi karnaa wakhtiga saxda ah ee aad xaqiijinayso warqad sawir leh.
6,Ma noo soo diri kartaa muunado hubin?
Jawaab: Haa,. Dalabka muunado ayaa diyaar ah
7,waa maxayWaqtiga hogaaminta?
Jawaab: Haddii aan haysanno kayd kuwa caadiga ah, wakhtiga hogaaminta waa hal maalin kadib lacag bixinta. Haddii ay tahay wax soo saarka tirada badan ee kuwa gaarka ah, wakhtiga hogaaminta waa qiyaastii 1530 maalmood. Haddii aan hore u dhammayn karno, waanu diri doonaa
akhbaartaada ka hor
8, Waa maxay hababka lacag bixinta ee aad aqbali kartaa?
Jawaab: Waxaan hadda aqbalnaa kaliya T/T.
